Takaitaccen Gabatarwa zuwa PV Ribbon Rolling Mills

      Matsayin jimla ɗaya: Kayan aikin mirgina na musamman don daidaitaccen mirgina waya tagulla cikin ɗigon jan ƙarfe mai ƙwanƙwasa (ƙwaƙwalwar walda mai ɗaukar hoto) shine ainihin kayan aiki don samar da nau'ikan walda na hotovoltaic.

1. Babban manufar

      Abun sarrafawa: Jafan jan karfe/gawayen jan ƙarfe zagaye waya (diamita mai shigowa na 0.1-1.2mm).

      Samfurin da aka gama: Tsiri mai siyarwa na hotovoltaic (mai rufin tagulla mai rufi) madauri, kauri 0.05-0.3mm, nisa 0.25-3mm, haƙuri ± 0.005-0.02mm.

      Ƙimar mahimmanci: Samar da babban aiki mai sauƙi da sauƙi don walda igiyoyin haɗin kai don samfurori na hotovoltaic, haɗa ƙwayoyin rana a cikin jerin, da fitarwa na yanzu.

2. Tsari da Ka'ida

Tsarin al'ada (rollers huɗu / rollers da yawa):

      Waya kwanciya → sarrafa tashin hankali → mikewa → daidaitaccen mirgina (yawan wucewa) → annealing kan layi → tsaftacewa → murfin kwano → iska.

      Mirgine: wanda aka yi da ƙarfe mai ƙarfi/ƙarfe mai sauri, tare da nau'ikan rollers da yawa a hankali ana danna ƙasa don tabbatar da daidaito da ingancin saman.

Ka'idar Aiki:

      Wayar tagulla zagaya tana fuskantar nakasar filastik ta hanyar juzu'i na rollers da yawa, kuma an baje ko'ina kuma an fidda shi zuwa ƙayyadaddun manufa.

      Servo + AGC kauri rufaffiyar madauki, daidaitawa mai ƙarfi na gibin abin nadi, juriya mai ƙarfi tsakanin ± 0.01mm.

      Rushewar kan layi yana kawar da taurin aiki kuma yana haɓaka ductility da haɓaka aiki.

3. Mabuɗin fasali

      Madaidaicin madaidaici: Haƙuri mai kauri ± 0.005mm, ƙasa mai santsi, babu tarkace ko raƙuman ruwa.

      Babban kwanciyar hankali: Saurin jujjuyawa na 60-150m/min, na iya ci gaba da aiki har tsawon kwanaki 30 ba tare da wani aibu ba.

      Haɗin kai ta atomatik: PLC+HMI, canjin ƙayyadaddun ƙayyadaddun dannawa ɗaya, wanda ya dace da samar da babban matakin GW.

      Material karbuwa: Tsarkakke jan karfe, jan karfe gami, saduwa high conductivity da low juriya bukatun.

4. Core sigogi (na al'ada)

      Waya mai shigowa: 0.3-0.8mm jan karfe waya

      Samfurin da aka gama: kauri 0.1-0.2mm x nisa 1.0-2.5mm

      Daidaito: Kauri ± 0.01mm, Nisa ± 0.02mm

      Gudun gudu: 80-120m/min

      Yawan aiki: 120-150 ton / watan

5. Yanayin aikace-aikace

      Kamfanin ribbon na Photovoltaic: yana samar da ribbon haɗin haɗin gwiwa da mashin bas don samfuran PERC/TOPCon/HJT.

      Kayan aiki masu goyan baya: sau da yawa haɗe tare da injunan suturar kwano, murhun wuta, da injunan juyawa don samar da layin samar da walda.

6. darajar masana'antu

      Sauya shigo da kaya, rage farashi da sama da 30%, da karya ikon mallakar fasahar ketare.

      Haɓaka daidaituwar ɓangarorin solder kuma ƙara haɓaka aikin sashi da kusan 0.2%.

      Daidaita da buƙatun manyan-girma, matsananci-bakin ciki, da raƙuman siyar da ba bisa ka'ida ba, suna goyan bayan rage farashin photovoltaic da ingantaccen inganci.